ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
6-12 Advanced Virtual Private Networking
v1.0, September 2007
d. Configure the LAN IP address according to the settings above and click Apply to save
your settings. For more information on LAN TCP/IP setup topics, please see “Configuring
LAN TCP/IP Setup Parameters” on page 8-2.
3. Set up the IKE Policy illustrated below on the FVG318.
a. Select VPN > Policies. The IKE Policies screen will display. Click Add to display the Add
IKE Policy screen shown below.
b. Configure the IKE Policy according to the settings in the illustration above and click
Apply to save your settings. For more information on IKE Policy topics, please see “IKE
Policy Automatic Key and Authentication Management” on page 6-2.
4. Set up the FVG318 VPN Auto Policy as illustrated below.
Note: After you click Apply to change the LAN IP address settings, your
workstation will be disconnected from the FVG318. You will have to log
on with http://10.5.6.1 which is now the address you use to connect to the
built-in Web-based configuration manager of the FVG318.
Figure 6-8