ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
5-22 Basic Virtual Private Networking
v1.0, September 2007
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard on LAN B:.
1. Log in to the FVG318 on LAN B at its default LAN address of http://192.168.0.1 with its
default user name of admin and password of passwor d.
2. Repeat the VPN Wizard process for the FVG318 on LAN B. Pay special attention and use the
following network settings as appropriate.
• WAN IP of the remote VPN gateway (for example, 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
– IP Address (for example, 192.168.0.1)
– Subnet Mask (for example, 255.255.255.0)
– Preshared Key (for example, 12345678)
3. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a. Open the FVG318, open VPN > Connection Status to get the IPSec Connection Status
screen (Figure 5-27).
b. Click Connect for the VPN tunnel you want to activate.
c. Look at the VPN Logs by selecting Monitoring < VPN Logs to verify that the tunnel is
connected.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 5-23 for information on the other ways.
Figure 5-27