ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Note: In this example, the Connection Name used on the client side of the VPN 
tunnel is NETGEAR_VPN_router and it does not have to match the
RoadWarrior Connection Name used on the gateway side of the VPN tunnel (see Figure
Tip: Choose Connection Names that make sense to the people using and administrating the VPN.
Figure
3.Enter the connection settings for the new connection:
a.Select Secure in the Connection Security check box
b.Select IP Subnet in the ID Type menu.
In this example, type 192.168.0.0 in the Subnet field as the network address of the FVG318.
c.Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the FVG318.
d.Select All in the Protocol menu to allow all traffic through the VPN tunnel.
e.Select the Connect using Secure Gateway Tunnel check box.
Basic Virtual Private Networking |
