NETGEAR FVG318NA manual V1.0, September

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual

b.Choose None in the Select Certificate box.

c.Select IP Address in the ID Type box. If you are using a virtual fixed IP address, enter this address in the Internal Network IP Address box. Otherwise, leave this box empty.

d.In the Internet Interface box, select the adapter you use to access the Internet. Select PPP Adapter in the Name menu if you have a dial-up Internet account. Select your Ethernet adapter if you have a dedicated Cable or DSL line. You may also choose Any if you will be switching between adapters or if you have only one adapter.

e.Click the Pre-Shared Key button. In the Pre-Shared Key dialog box, click the Enter Key button. Enter the FVG318’s Pre-Shared Key and click OK. In this example, 12345678 is entered. This field is case sensitive.

Figure 5-11

6.Configure the VPN Client Authentication Proposal. Provide the type of encryption (DES or 3DES) to be used for this connection. This selection must match your selection in the FVG318 configuration.

a.In the Network Security Policy list on the left side of the Security Policy Editor window, expand the Security Policy heading by double clicking its name or clicking on the “+” symbol.

b.Expand the Authentication subheading by double clicking its name or clicking on the “+” symbol. Then select Proposal 1 below Authentication.

5-12 Basic Virtual Private Networking

v1.0, September 2007