ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
This screen shows the following parameters:
Table 7-1. FVG318 Status fields
Field | Description | |
|
|
|
| System Name | The System Name assigned to the firewall. |
|
|
|
| Firmware Version | The firewall firmware version. |
|
|
|
Wireless Configuration | The wireless settings of the router | |
|
|
|
| SSID: | The name of your wireless network. The default is NETGEAR. |
|
|
|
| Mode |
|
|
|
|
| Security Settings | Shows what security has been associated with the wireless configuration. The |
|
| default is none |
|
|
|
| Region | Shows the region is which the wireless gateway is operating |
|
|
|
| Channel | Indicates the operating channel of the wireless radio. |
|
|
|
| AP MAC Address | The MAC address of the wireless access point. |
|
|
|
WAN Port | These parameters apply to the Internet (WAN) port of the firewall. | |
|
|
|
| WAN State | Indicates if the WAN port is up or down. |
|
|
|
| NAT | Indicates if the router is in NAT mode (enabled) or in routing mode (disabled). |
|
|
|
| DHCP | The protocol on the WAN port used to obtain the WAN IP address. This field |
|
| can show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to |
|
| Client, the firewall is configured to obtain an IP address dynamically from the |
|
| ISP. |
| Connection State | Indicates if the WAN port is connected or not. |
|
|
|
| IP Address | The IP address used by the Internet (WAN) port of the firewall. If no address is |
|
| shown, the firewall cannot connect to the Internet. |
|
|
|
| IP Subnet Mask | The IP Subnet Mask being used by the Internet (WAN) port of the firewall. |
|
|
|
| Gateway | Gateway address of the WAN port. |
|
|
|
| Primary DNS | DNS server IP address of the WAN port. |
|
|
|
| Secondary DNS | Secondary DNS server IP address of the WAN port (if not assigned, it will be |
|
| the same as the primary DNS server). |
|
|
|
| DHCP | The protocol on the WAN port used to obtain the WAN IP address. This field |
|
| can show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to |
|
| Client, the firewall is configured to obtain an IP address dynamically from the |
|
| ISP. |
|
|
|
| MAC Address | The MAC address used by the Internet (WAN) port of the firewall. |
|
|
|
LAN Port | These parameters apply to the Local (WAN) port of the firewall. | |
|
|
|
| MAC Address | The MAC address used by the LAN port of the firewall. |
|
|
|
|
|
|
| Maintenance | |
