ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Note: The default log in address for the FVG318 router is http://192.168.0.1 with the 
default user name of admin and default password of password. The login address
will change to the local LAN IP subnet address after you configure the router. The user name and password will also change to the ones you have chosen to use in your installation.
Activating the VPN Tunnel
You can activate the VPN tunnel by testing connectivity and viewing the VPN tunnel status information as described in the following flowchart:
Fail
Start
Test Step 1
Ping Remote
LAN IP Address
Pass
Fail
Fix the
Router Network
and then Retest
Test Step 2
Ping Remote
WAN IP Address
Pass
Fix the
VPN Tunnel
and then Retest
Test Step 3
View VPN
Tunnel Status
End
Figure C-2
All traffic from the range of LAN IP addresses specified on the router at Gateway A and the router at Gateway B will now flow over a secure VPN tunnel.
The FVG318-to-FVG318 Case
Table C-1. Policy Summary
VPN Consortium Scenario: | Scenario 1 |
|
|
|
|
Type of VPN |
| |
|
|
|
|
|
|
VPN Configuration of NETGEAR FVG318 | ||
