ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
VPN Configuration of NETGEAR FVG318 C-7
v1.0, September 2007
The FVG318-to-FVS318v2 Case
Configuring the VPN Tunnel
This scenario assumes all ports are open on the FVG318 and FVS318v2.
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A as in the illustration (Figure C-4).
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
2. Use the VPN Wizard to configure the FVG318 at Gateway A.
Table C-2. Policy Summary
VPN Consortium Scenario: Scenario 1
Type of VPN LAN-to-LAN or Gateway-to-Gateway
Security Scheme: IKE with Preshared Secret/Key
Date Tested: November 2004
IP Addressing:
NETGEAR-Gateway A Static IP address
NETGEAR-Gateway B Static IP address
Figure C-4
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of http://10.5.6.1 at Gateway A.
Note:
FVG318 FVG318