ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual

Subnet Mask: 255.255.255.0 (in this example)

3.Log in to the FVG318 labeled Gateway B.

Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password (or using whatever password and LAN address you have chosen).

Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://172.23.9.1 at Gateway B

4.Repeat the process using the VPN Wizard to configure the FVG318 at Gateway B.

Connection Name: Scenario_1 (in this example)

Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints

Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN tunnel endpoint

Remote LAN IP Subnet

IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint

Subnet Mask: 255.255.255.0 (in this example)

All traffic from the range of LAN IP addresses specified on FVG318 A and FVG318 B will now flow over a secure VPN tunnel once the VPN tunnel is initiated (see “Initiating and Checking the VPN Connections” on page C-6).

Viewing and Editing the VPN Parameters

The VPN Wizard sets up a VPN tunnel using the default parameters from the VPN Consortium (VPNC).

The Pre-Shared Key must be the same at both VPN tunnel endpoints.

The remote WAN and LAN IP addresses for one VPN tunnel endpoint will be the local WAN and LAN IP addresses for the other VPN tunnel endpoint.

The VPN Wizard ensures the other VPN parameters are the same at both VPN tunnel endpoints.

VPN Configuration of NETGEAR FVG318

C-5

v1.0, September 2007

Page 161
Image 161
NETGEAR FVG318NA manual Viewing and Editing the VPN Parameters