NETGEAR FVG318NA Appendix a Default Settings and Technical Specifications, Internet Connection

Appendix A Default Settings and Technical Specifications

Default Settings

You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.

•To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in below. (The Factory Default Restore button on the rear panel is shown in the illustration “The FVG318 Rear Panel” on page 1-6.)

•Pressing the reset button for a shorter period of time will simply cause your device to reboot.

After you install the VPN firewall, use the procedures below to customize any of the settings to better meet your networking needs.

Feature		Default Behavior
Router Login
	User Login URL	http://192.168.0.1
	User Name (case sensitive)	admin
	Login Password (case sensitive)	password
Internet Connection
	WAN MAC Address	Use Default address
	WAN MTU Size	1500
	Port Speed	AutoSense
Local Network (LAN)
	Lan IP	192.168.0.1
	Subnet Mask	255.255.255.0
	RIP Direction	None
	RIP Version	Disabled
	RIP Authentication	None
	DHCP Server	Enabled
Default Settings and Technical Specifications		A-1

v1.0, September 2007