ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
C-2 VPN Configuration of NETGEAR FVG318
v1.0, September 2007
Configuring the Gateways
Configure each gateway:
1. Configure Gate A.
a. Log in to the router at Gateway A.
b. Use the VPN Wizard to configure this router.
Enter the requested information as prompted by the VPN Wizard:
• Connection Name and Pre-Shared Key
• Remote WAN IP address
• Remote LAN IP Subnet: IP Address and Subnet Mask:
2. Repeat the above steps for Gateway B.
a. Log in to the router at Gateway B.
b. Use the VPN Wizard to configure this router.
Enter the requested information as prompted by the VPN Wizard.
Figure C-1
Note: The WAN and LAN IP addresses must be unique at each end of the VPN tunnel.