ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Configuring Wireless Connectivity 3-13
v1.0, September 2007
3. Select the WPA radio box and then select RADIUS from the WPA with: pull-down menu in
the Wireless Security Type section. The RADIUS settings fields in the Radius Server Settings
section will be highlighted.
4. Enter the Radius Server Settings.
•Primary Server Name/IP Address: This field is required. Enter the name or IP address
of the primary Radius Server on your LAN.
•Radius Port: Enter the port number used for connecting to the Radius Server.
•Shared Key: Enter the desired value for the Shared Key. This must match the value used
on the Radius server.
5. Click Apply to save your settings.
Figure 3-6
Note: The Encryption choice will be TKIP by default. For WPA with RADIUS,
TKIP is used.