ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Maintenance 7-3
v1.0, September 2007
Click Show Statistics to display the WAN connection status,This screen shows the data transfer statistics for the WAN and LAN ports, including the duration they were enabled. The following data is displayed:.IP Address The IP address used by the Local (LAN) port of the firewall. The default is
192.168.0.1
IP Subnet Mask The IP Subnet Mask used by the Local (LAN) port of the firewall. The default is
255.255.255.0
DHCP Identifies if the firewall’s built-in DHCP server is active for the LAN attached
devices.
Figure 7-2
Table 7-2. Connection Status fields
Field Description
Tx packets The number of IP packets going out through the port.
Rx Packets The number of IP packets received by the port.
Collisions The number of signal collisions that have occurred on the part. (A collision occurs
when the port tries to send data at the same time as a port on another router or
computer that is connected to this port.
Tx/Bs The number of bytes going out of the port per second
Rx/Bs The number of bytes received by the port per second.
Uptime The duration the port as been active; the uptime is reset to zero when the router or port
is restarted.
Table 7-1. FVG318 Status fields
Field Description