Palm TREOPROBLKSPT manual Beaming a Record, Receiving Beamed Information, 220

Beaming a Record

1.Highlight the entry or file you want to beam.

2.Press Menu (right softkey) and select Beam. (If you don’t see a Beam command, select Send… > Beam instead. The Beam and Send menu items change names based on the type of item you highlighted.)

3.When the name of the receiving device appears, select it to begin the transfer. Do one of the following:

■Bluetooth: When the name of the receiving device appears, select it to begin the transfer. (A blue icon indicates a Bluetooth connection.)

■IR: Select Infrared. Point the IR port on your device

directly at the IR port of the receiving device. (A red icon indicates an IR connection.)

4.Wait for Done to appear next to the name of the receiving device before you continue using your smartphone.

Tip

The regional setting determines the list of characters that can be used when info is beamed between devices. If you try to send or receive a character that is not on the list, it appears as a question mark.

Receiving Beamed Information

1.Press End to turn on your screen if it is not already on.

2.If you are beaming over an IR port, point the IR port on your on your smartphone directly at the IR port on the transmitting device.

3.When the Receiving Data message appears, select Yes to receive the beam.

220 Section 3F: Using Wireless Connections