Palm TREOPROBLKSPT manual Open Comm Manager, Using Wireless Connections 221

Tip	If you can’t receive beamed information, press Start and select Settings.
	Select the Connections tab, and then select Beam. Make sure the Receive
	all incoming beams box is checked. If you still can’t receive information, try
	a soft reset (see “Resetting Your Treo™ Pro Smartphone by Palm” on
	page 375).

Using Comm Manager to Turn Wireless Services On and Off

To quickly turn all wireless services on or off, press and hold Power . Use Comm Manager to turn individual wireless features on or off.

▶To open Comm Manager, tap near the top of the Today screen anywhere at the level of Sprint or Phone off.

You can also do any of the following:

⬤On the Today screen, select Sprint or Phone off.

⬤On the Today screen, tap the signal-strength icon at the top of the screen and then select Comm Manager.

⬤If Bluetooth is on, tap the Bluetooth icon on the Today screen.

To manage wireless services with Comm Manager:

1.Open Comm Manager.

2.Highlight a wireless service using Up and Down on the 5-way, and then press Center to toggle the setting. (You can also tap the ON or OFF button for a service.)

■Airplane Mode: Turns off all wireless services that are on.

■Phone: Enables or disables the phone application on your device. (Press Settings [right softkey] and select Phone to configure your phone settings.)

Wireless Connections

Section 3F: Using Wireless Connections 221