3.Enter the following settings, and then press Next (right softkey):

Authentication: Set the method used to identify devices that connect to the network:

Open: The network uses open authentication.

Shared: The network uses shared authentication.

WPA: The network is a WPA network that uses 802.1x protocols.

WPA-PSK:The network is a WPA network that requires a password that is shared between the network and your Treo Pro smartphone. (This password is also known as a pre-shared key [PSK].)

WPA2: The network provides government grade security with an AES encryption algorithm.

WPA2-PSK:The network is a WPA2 network that requires a pre-shared key.

Data Encryption: Set the encryption method. (The options in this list vary based on your Authentication setting.)

Disabled: Turn data encryption off.

WEP: Turn on the Wired Equivalent Privacy encryption method.

TKIP: Turn on the Temporal Key Integrity Protocol encryption method. (This method is often used to encrypt WPA and WPA-PSK connections.)

AES: Turn on the Advanced Encryption Standard protocol. (This method is often used to encrypt WPA, WPA-PSK, WPA2, and WPA2-PSK connections.)

The key is automatically provided: Set whether you need to specify the network key and key index provided by your system administrator, or whether the network provides this information. (The availability of these options varies based on your Authentication and Data Encryption settings.)

Wireless Connections

Section 3F: Using Wireless Connections

209

Page 209
Image 209
Palm TREOPROBLKSPT manual Using Wireless Connections 209