By default, the Wi-Fi feature on your smartphone disconnects and turns off when the screen is off. If you change the default Wi-Fi settings, be sure to turn off the Wi-Fi feature when it is not in use (see “Using Comm Manager to Turn Wireless Services On and Off” on page 221). You can also turn on the Enable Power Savings option in Wi-Fi Settings to conserve battery power (see “Customizing Wi-Fi Settings” on page 211).

As with any wireless phone, if your phone is on and you’re in an area with no wireless coverage, your smartphone continues to search for a signal, and that consumes power. If you cannot move to an area of better coverage, temporarily turn off your phone (see “Turning Your Phone On and Off” on page 34).

Turn down the screen brightness (see “Adjusting the Brightness” on page 346).

Turn off the screen saver (see “Viewing and Optimizing Power Settings” on page 364).

Set your screen to turn off automatically after a shorter period of inactivity (see “Viewing and Optimizing Power Settings” on page 364).

Turn off the option to receive beamed information if you’re not using it (see “Receiving Beamed Information” on page 220).

Keep your battery and your smartphone away from direct sunlight and other sources of heat. Temperatures over 113 degrees Farenheit (45 degrees Celsius) can permanently reduce the capacity and life span of any lithium-ion battery.

Device Setup

Did you know?

If your battery becomes fully drained, your information remains safely stored on your Treo Pro smartphone. Recharge the battery to access your information.

Section 1A: Setting Up Your Treo™ Pro Smartphone by Palm

29

Page 29
Image 29
Palm TREOPROBLKSPT manual Did you know?