If you are using an application, press and hold End . (Keyguard turns on, and after a short delay, the screen turns off. The screen wakes up to the application you were using.)

Press Power . (The screen turns off immediately, with Keyguard turned on. The screen wakes up to the Today screen or to the application you were using.)

Turning Your Phone On and Off

When your phone is off, Phone off and the phone-off icon appear at the top of the Today screen. If the status reads No Service, the phone is on, but you are outside a coverage area. An exclamation point (!) appears next to the signal-strength icon. When you turn on your phone, it connects to a wireless network so that you can make and receive phone calls and use other wireless services. When you are inside a coverage area, the signal-strength

icon has bars in it.

To turn your phone on:

Press and hold Power . (When your Treo Pro smartphone locates a signal, Sprint and the signal-strength

icon appear at the top of the screen, indicating that you can use the phone and Internet features.)

To turn your phone off:

Press and hold Power .

If the Ringer switch is set to Sound On , you hear a series of tones when you turn your phone on and off. For more information, see “Setting the Ringer Switch” on page 344.

Tip

When the phone is on and the screen is off, the date and time screen saver appears. You can disable the screen saver. Press Start, select Settings, select the System tab, and then select Power. Select the Screen Saver tab, and then uncheck the Enable Screen Saver box.

34

Section 1B: Setting Up Service

Page 34
Image 34
Palm TREOPROBLKSPT manual Turning Your Phone On and Off, To turn your phone on, To turn your phone off