Palm TREOPROBLKSPT manual Disconnecting From a Wi-Fi Network, 210

■Network key: Enter the Network key provided by your system administrator, if it is not automatically provided by the network. (The availability of this option varies based on your Authentication and Data Encryption settings.)

■Key index: Enter the Key index provided by your system administrator, if it is not automatically provided by the network. The availability of this option varies based on your Authentication and Data Encryption settings.

4.Enter the following settings, and then press Finish (right softkey):

■Use IEEE 802.1x network access control: Set these parameters if required by the network.

■EAP type: Set the Extensible Authentication Protocol type.

5.Press OK .

Note

If you also need to create a custom security certificate, see “Customizing Wi-Fi Settings” on page 211 for instructions.

Disconnecting From a Wi-Fi Network

To disconnect from a Wi-Fi network, do one of the following:

⬤To save any settings you entered, press and hold Wi-Fi to disconnect from the Wi-Fi network. (The next time you’re within range and the Wi-Fi feature is turned on, your Treo Pro smartphone automatically connects to this network.)

⬤To save any settings you entered, you can also tap the Wi-Fi icon, select Comm Manager, and tap Wi-Fi OFF.

⬤Press Start , select Settings, select the Connections tab, and then select Wi-Fi. Highlight the network from which you want to disconnect, and then press Menu (right softkey) and select Turn Off Wi-Fi.

210 Section 3F: Using Wireless Connections