Palm TREOPROBLKSPT manual This is a device-to-device ad-hoc connection Leave, 208

■Wi-Fi was off: A notification appears, listing up to three available networks. If the network you want appears, select it and press OK (left softkey) to connect. If the network you want does not appear, select Show all networks, highlight the network you want, and press Connect.

Note

As you continue with this procedure, depending on the selections you make, some screens are not displayed, and you can skip those steps.

2.On the Configure Wireless Networks screen, enter the following settings, and then press Next (right softkey):

■Network name: If this field is blank, enter the SSID provided by the system administrator. (This field is case sensitive.)

■Connects to: Set whether this network connects to the Internet or to Work. (You may need to select Work to access a corporate intranet.)

■This is a hidden network: If you had to enter the network name, this is a hidden network. (Check this box to connect to this network now and in the future.)

■This is a device-to-device (ad-hoc) connection: Leave

this box unchecked if you’re connecting to a network (Wi-Fi access point). (Check this box only if you’re connecting to another device.)

208 Section 3F: Using Wireless Connections