Palm TREOPROBLKSPT manual Sending Information Over a Bluetooth Connection

Sending Information Over a Bluetooth Connection

You can send an individual entry or file.

1.Make sure the receiving device is ready to receive a Bluetooth connection.

2.Highlight the entry or file you want to send.

3.Press Menu (right softkey) and select Beam. (If you don’t see a Beam command, select Send… > Beam instead. The Beam and Send menu items change names based on the type of item you highlighted.)

4.Select the receiving device in the list.

When the transmission is complete, Done appears next to the name of the receiving device.

Wireless Connections

Tip

Check your battery level before establishing a Bluetooth connection. If the battery level is low, you can’t make a Bluetooth connection.

Did you know?

You can synchronize using a Bluetooth connection (see “Synchronizing Over a Bluetooth® Wireless Technology Connection” on page 336).

Receiving Information Over a Bluetooth Connection

1.Go to your Today screen.

2.Press Start and select Settings.

3.Select the Connections tab and then select Bluetooth .

4.Select the Mode tab and check the Turn on Bluetooth box to turn on the Bluetooth feature on your smartphone. (Wait about 10 seconds for the Bluetooth feature to activate.)

Section 3F: Using Wireless Connections 217