Palm TREOPROBLKSPT manual Connecting to a Secure Network, Using Wireless Connections 207

■Wi-Fi was off: A notification appears, listing up to three available networks. If the network you want appears, highlight it and press OK (left softkey) to connect. If the network you want does not appear, select Show all networks, highlight the network you want, and press Connect (left softkey).

Tip	To dismiss the notification without connecting to a network, press Menu
	(right softkey) and select Dismiss. To turn off the notification feature, press
	Menu (right softkey) and select Don’t show this message again. You can
	turn the feature back on later (see “Customizing Advanced Wi-Fi Settings”
	on page 213).

Wireless Connections

2.When the connection message appears, press Dismiss (right softkey).

Tip

Narrow the list of networks that appear on the Configure Wireless Networks screen by selecting Networks to access and then selecting Only access points or Only computer-to-computer.

Some locations, such as airports and coffee shops, provide an open network but charge a fee to use it. After you connect your smartphone to the network, you need to open Internet Explorer Mobile and register with the Wi-Fi service provider before you can check email or browse the Web.

Connecting to a Secure Network

To set up a connection to a secure network, do the following:

1.Press Wi-Fi on the side of your smartphone. What happens next depends on the state of Wi-Fi before you pressed the button:

■Wi-Fi was already on: Your smartphone scans for available networks and automatically connects when possible. If your device does not automatically connect and the Configure Wireless Networks screen appears, highlight the network you want, and press Connect (left softkey), or select Add New.

Section 3F: Using Wireless Connections 207