BAROMETER
The barometer features include:
•Altitude, ascent and descent
•Temperature during training (can be viewed on the display)
•Inclinometer (Requires Speed Sensor Bluetooth® Smart)
V800 measures altitude with an atmospheric air pressure sensor and converts the measured air pressure into an altitude reading. This is the most accurate way to measure altitude and altitude changes (ascent / descent) after calibration. Ascended and descended are shown in meters/feet. Uphill/downhill steepness is shown in percentages and grade, and is only visible during training when using a Speed Sensor Bluetooth® Smart when cycling.
To make sure that the altitude remains accurate, it needs to be calibrated whenever a reliable reference, such as a peak or a topographic map, is available or when at sea level. Calibration can also be set to automatic. This is especially useful if a training session is always started in the same environment. Pressure variations due to weather conditions, or indoor
The temperature shown is the temperature of your V800. When wearing V800 on your wrist, your body heat affects the temperature reading. To get an accurate air temperature reading, take V800 off your wrist for
Altitude is automatically calibrated with GPS, and the altitude will be shown in gray until it is calibrated. To get the most accurate altitude readings, it is recommended to always manually calibrate altitude when you know your current altitude. Manual calibration can be done in the
SMART COACHING
Whether it’s assessing your
V800 includes the following Smart Coaching features:
•Training Load
•Recovery status based on Training Load and 24/7 activity
•Training Benefit
•Jump Test
•Fitness Test
•Orthostatic Test
58