Polar V800 manual Polar Cadence Sensor Bluetooth Smart, Pair a Cadence Sensor with

ETRTO	Wheel size diameter (inches)	Wheel size setting (mm)
35-559	26 x 1.50	1947
37-622	700 x 35C	1958
52-559	26 x 1.95	2022
20-622	700 x 20C	2051
52-559	26 x 2.0	2054
23-622	700 x 23C	2070
25-622	700 x 25C	2080
28-622	700 x 28	2101
32-622	700 x 32C	2126
42-622	700 x 40C	2189
47-622	700 x 47C	2220

Wheel sizes on the chart are advisory as wheel size depends on the wheel type and air pressure.

Method 2

•Measure the wheel manually for the most accurate result.

•Use the valve to mark the point where the wheel touches the ground. Draw a line on the ground to mark that point. Move your bike forward on a flat surface for one complete rotation. The tire should be per- pendicular to the ground. Draw another line on the ground at the valve to mark a full rotation. Measure the distance between the two lines.

•Subtract 4 mm to account for your weight on the bike to get your wheel circumference.

POLAR CADENCE SENSOR BLUETOOTH® SMART

PAIR A CADENCE SENSOR WITH V800

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

There are two ways to pair a cadence sensor with your V800:

1.Press START in time view to enter pre-training mode.

2.V800 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that the sensor is activated.

3.The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes.

90