Polycom PDS 2000 manual Adding Audio to a Slide

Models: PDS 2000

1 216
Download 216 pages 52.8 Kb
Page 126
Image 126

Polycom Digital Signage Administrator Guide

Adding and Working with Slides

 

 

8Choose OK to close the Command Builder dialog box. The action appears in the Playlist Editor.

9To delete a command, select a command in the Playlist Editor and choose Delete.

10To edit a command, select a command in the Playlist Editor and choose Edit, or double-click on the command.

11Choose OK to close the Playlist Editor. The list of commands appear in the Playlist area.

12To edit the playlist, choose Edit Playlist….

Adding Audio to a Slide

The Polycom Digital Signage solution supports .mp3, .wma, and .wav audio formats. Add as many audio files as you like to the audio playlist. The audio properties associated with a slide are defined as follows:

Reset Audio — If set to True, automatically stops any previous audio that is playing when the slide is rendered to the output.

Play Audio Clip — If set to True, plays audio clip(s) added to the Audio Playlist.

Loop — If available and set to True, loops audio added to the Audio Playlist.

Auto Advance — If available and set to True, automatically advances to the next playlist event when the audio playlist ends.

Playlist Volume — Audio playout level (from 0-100).

Use Default Master Volume — If set to True, uses default master volume defined by the Master Volume setting.

Use Custom Mixer Settings — Applies settings created in the Mixer to audio in the playlist.

To add an audio clip to the slide’s Audio Playlist:

1In the Audio Playlist area, choose Add File. The Select File dialog box appears.

116

Polycom, Inc.

Page 126
Image 126
Polycom PDS 2000 manual Adding Audio to a Slide