Adding and Editing a Crawl | Using Template Maker |
|
|
Setting the Position of a Crawl
Open the Layout tab of the Crawl Settings dialog to set the crawl position within the template.
•XPos — Specifies the horizontal begin point of the crawl (in pixels).
•YPos — Specifies the vertical position of the crawl (in pixels).
•Width — Specifies the horizontal extent of the crawl across the screen (in pixels).
•Height — Specifies the vertical extent of the crawl across the screen (in pixels).
•Text YPos — Specifies the vertical positioning of the crawl text within the crawl bar (in pixels).
•Image YPos — Specifies the vertical positioning of the separator image within the crawl bar (in pixels).
•Crawl Spacing — Specifies the distance between lines of crawl data (in pixels).
Polycom, Inc. | 133 |
