Powerware 9315s manual Meters Printout Ctrl + M, System Information Printout Ctrl + a

13.5.3Meters Printout (Ctrl + M)

This key sequence prints the current readings of the SSBM system meters. The Input area shows the phase-to-phase voltage, frequency, and phase current of the incoming utility, followed by the kVA, kW, and power factor measurements. The output area shows the same information for the power being output by the SSBM. The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area displays the DC voltage (V) and the DC current (I). Figure 13---5 shows a sample Meters printout.

		Uninterruptible Power System
UPS System Normal						03 NOV 1997 14:22:45
Alarm:	None
Notice:	None
		Input				Output
VAB		VBC	VCA FREQ		VAB	VBC	VCA		FREQ
480		480	480 60.0		480	480	480		60.0
	IA	IB		IC	IA	IB	IC		IN
	640	640		640	480	480	480		0
	KVA	KW		PF		KVA	KW		PF
	530	505		0.95		400	320	0.80
		Bypass				Battery
	VAB	VBC		VCA		V	+		I
	480	480		480		540			0

Figure 13---5. System Meters Screen

13.5.4System Information Printout (Ctrl + A)

This key sequence prints a listing of all available serial data. This printout contains the information shown on the Event History Log and Meters screens of the SSBM (both Figures 13---4 and 13---5).

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM	13--9
164201373 Rev. A 092402