13.6.5Program Unit Name

If Program Unit Name is selected from the main menu, the following is displayed:

Program Unit Name Unit Name:

Enter New Name or <CR> No Change: NOTE: Unit Name is 45 characters maximum

The current unit name is displayed. This name will be displayed on the second line of the display and in the headers of prints from Terminal mode. If a change is desired, the new unit name should be entered at the prompt. The unit name is 45 characters maximum and includes spaces and any punctuation. If the user wants to center the text portion of the name, the appropriate number of leading spaces should be included when entered.

13.6.6Change Password

If Change Password is selected from the main menu, the following menu is displayed:

Change Password Enter New Password: Verify New Password:

NOTE: Password must be six characters in length.

<CR> to return with no change.

The password will be changed if the user enters and verifies the password. The entry must be six characters.

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

13--13

164201373 Rev. A 092402

 

Page 135
Image 135
Powerware 9315s manual Program Unit Name, Change Password