Powerware 9315s manual RIM Wire Terminations

4.Connect RIM wiring to the terminal block using the terminations shown in Table 5---1.

Table 5---1. RIM Wire Terminations

From RIM A	To SSBM	Remarks
TB1---4	TB3---1	TWISTED WIRES (4)
TB1---5	TB3---2
		1---2 TURNS PER
TB1---6	TB3---3	3 INCHES
TB1---7	TB3---4
From RIM B (if used)	To SSBM	Remarks
TB1---4	TB3---5	TWISTED WIRES (4)
TB1---5	TB3---6
		1---2 TURNS PER
TB1---6	TB3---7	3 INCHES
TB1---7	TB3---8

5.Contact your local field service office for verification and testing of the RIM and its connections prior to making connections to J1---J4.

You can order interface cables separately for connecting to the 15-Pin D-Sub Connectors.

6.Repeat steps 1 through 5 for each RIM you are installing.

7.If you are installing an RMP or SCM in addition to an RIM, proceed to Chapter 4 or 6, respectively; otherwise, secure the SSBM by reversing the steps contained in procedure “To Prepare the SSBM for Wiring to an RMP, RIM, SCM, or Remote EPO” of Chapter 2.

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM	5--3
164201373 Rev. A 092402