Powerware 9315s manual AC Input from UPS

Table C. Power Cable Termination Requirements

Powerware 9315 SSBM Model: 2500 and 3000

					Tightening	Bolt/Int.
				Number of Cable	Torque	Hex Size
Terminal Function	Terminal	Function		Connections per Bus	N-M (lb-ft)	(In.)
AC Input from UPS	E8	Phase A	14	--- 2 bolt mounting	76 (56)	1/2
Output to SSBM
	E9	Phase B	14	--- 2 bolt mounting	76 (56)	1/2
	E10	Phase C	14	--- 2 bolt mounting	76 (56)	1/2
	E4	Neutral	24	--- 2 bolt mounting	76 (56)	1/2
	Frame	Ground	24	--- 1 bolt mounting	76 (56)	1/2
	Ground
AC Input to SSBM	E1	Phase A	12	--- 2 bolt mounting	76 (56)	1/2
Bypass
	E2	Phase B	12	--- 2 bolt mounting	76 (56)	1/2
	E3	Phase C	12	--- 2 bolt mounting	76 (56)	1/2
	E4	*Neutral	24	--- 2 bolt mounting	76 (56)	1/2
	Frame	Ground	28	--- 1 bolt mounting	76 (56)	1/2
	Ground
AC Input to	E11	Phase A	14	--- 2 bolt mounting	76 (56)	1/2
optional SMB
	E12	Phase B	14	--- 2 bolt mounting	76 (56)	1/2
Bypass
	E13	Phase C	14	--- 2 bolt mounting	76 (56)	1/2
(Separate Feed)
	E4	*Neutral	24	--- 2 bolt mounting	76 (56)	1/2
	Frame	Ground	24	--- 1 bolt mounting	76 (56)	1/2
	Ground
AC Output from	E5 (E15)	Phase A	12 (14) --- 2 bolt mounting		76 (56)	1/2
SSBM or Optional
	E6 (E16)	Phase B	12 (14) --- 2 bolt mounting		76 (56)	1/2
SMB to Critical
	E7 (E17)	Phase C	12 (14) --- 2 bolt mounting		76 (56)	1/2
Load
	E4	*Neutral	24 (24) --- 2 bolt mounting		76 (56)	1/2
	Frame	Ground	20 (24) --- 1 bolt mounting		76 (56)	1/2
	Ground
AC Output from	∅ A	Phase A	12	--- 2 bolt mounting	76 (56)	1/2
SSBM to Load
	∅ B	Phase B	12	--- 2 bolt mounting	76 (56)	1/2
Bank
	∅ C	Phase C	12	--- 2 bolt mounting	76 (56)	1/2
	E4	*Neutral	24	--- 2 bolt mounting	76 (56)	1/2
	Frame	Ground	28	--- 1 bolt mounting	76 (56)	1/2
	Ground

NOTES: * = These neutral bolt mountings are only available on SSBMs or SSBMs with SMBs rated as 3P/4W.

DESCRIPTION:

INSTALLATION NOTES

DRAWING NO: 164201373---1

SHEET: 3 of 6

A---4	Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
	164201373 Rev. A 092402