![](/images/new-backgrounds/1300528/30052855x1.webp)
2
The DL3800E unit features an automatic rate fallback in the event of a failing E1 circuit. If the performance of an E1 circuit is detected to be falling below accepted levels, the DL3800E unit automatically removes the E1 from service, and throttles back the DTE to a data rate corresponding to the remaining E1s. When the alarm condition on the affected E1 has been cleared, the DL3800E unit can automatically restore the E1 and data rate.
You can configure, control, and monitor the DL3800E unit through the front panel, an ASCII terminal (locally or remotely via a modem or remotely
A downloadable software feature of the DL3800E unit allows new features and functionality to be added to the unit on line (without interrupting the data) via the unit's
PRODUCT FEATURES
The DL3800E Inverse Multiplexer allows you to connect
System Features
•High bandwidth data transmission over 1 through 8 E1 ports.
•HSSI or V.35/RS449/X.21 DTE interface
•Automatic Bandwidth response/recovery
•Local or remote management via front panel, terminal, or embedded SNMP agent
•Extensive diagnostics:
•Front panel indicators
•
•Automatic self test
•Integral event log with nonvolatile memory
DL3800E Inverse Multiplexer User’s Guide — July 9, 2001 |