4
4.To log on to another DL3800E unit on the same daisy chain, simply type
The previous unit is logged out and the new unit is logged on.
5.To log off all units without logging onto any new units, press
TERMINAL OPERATION OVERVIEW
General Menu Flow
The menu interface for the DL3800E unit consists of the Main Menu, and a series of submenus.
From the Main Menu, select the submenu to be selected or function to be performed by moving the highlight bar through the menu screen with the Cursor Arrow keys until the desired function is highlighted.
To prevent any accidental data and/or status change, every proposed change requires a confirmation response. To confirm a proposed change, move the highlight bar to Confirm on the menu and press Enter. Type any other key and the change will not be made. This will cause the terminal to continue to prompt you to confirm the change(s). To abort the change, move the highlight bar to Exit, and press the Enter key rather than confirming the change.
NOTE: Pressing the Escape key brings the display back to Select
Local/Remote when in the Main Menu, and back to Exit when in the
EXECUTION MENU.
Screen Description
The top four lines of each display screen contain information regarding the last two status or alarm conditions reported by the DL3800E unit. This information includes: the severity of condition reported; the date and time condition was reported; the Unit and NET (E1 port) reporting the alarm; a code for the type of condition, and a description of the condition.
DL3800E Inverse Multiplexer User’s Guide — July 9, 2001 |
