
4
Major | 01/01/90 04:58:17 | Unit: | 0 | NET : 2 | (114) |
|
|
|
|
| |||
Network 15 Minute UAS | Major Threshold Exceeded |
|
|
|
|
| |||||||
Major | 01/01/90 04:58:17 | Unit: | 0 | NET : 1 | (114) |
|
|
|
|
| |||
Network 15 Minute UAS Major Threshold | Exceeded |
|
|
|
|
| |||||||
DIGITAL LINK DL3800E | SR 2.00.00 NODE |
| 7: | 01/01/90 05:55:07 | MJ |
|
|
| |||||
SELECTED DEVICE ADDRESS: | 7.00.000 | NAME: |
|
|
|
|
|
| |||||
NETWORK CONFIGURATION | Exit Confirm |
|
|
|
|
|
|
|
| ||||
PORT | ALARM | ACTIVE/RESTORE CRC4 |
| TSLOT16 | N1 | N2 | N3 | N4 | N5 | ||||
1 | REPORT | Use w/auto restoreENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||||
2 | REPORT | Use w/auto restoreENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||||
3 | MASK | Never Use |
| ENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||
4 | MASK | Never Use |
| ENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||
5 | MASK | Never Use |
| ENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||
6 | MASK | Never UseENABLE | DATA |
|
|
| 1 | 1 | 1 | 1 | 1 | ||
7 | REPORT | Use w/auto restoreENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 | ||||
8 | MASK | Never Use |
| ENABLE | DATA |
| 1 | 1 | 1 | 1 | 1 |
Primary Clock Source: | Xmt: | Int | Rcv: | Net 1 |
| |
Secondary Clock Source: Xmt: | Net | Rcv: | Net 2 |
| ||
DSU MODE: Inverse Mux (Standard | operation) | Suppress Yellow Det.: Disabled | ||||
Second Error restoral interval: |
| Immediate |
|
| ||
Hardware Revision: | Port 3&4: |
| Port 5&6: | Port 7&8: |
| Figure |
| Table |
|
|
Parameter | Description/Action |
|
|
Alarm | This item allows you to enable (Report) or disable (Mask) the DL3800E unit |
| from reporting alarms or sending SNMP traps from any of the individual E1 |
| network ports. |
| To change the present Alarm mode, use the UP and DOWN ARROW keys |
| to highlight the Alarm item in the appropriate line for the desired port, and |
| use the Space Bar to toggle between Report and Mask. Highlight Confirm, |
| and press the Enter key to confirm any change. (Default - Mask) |
|
|
Active/Restore Mode | Selects the Active/Restore Mode for each of the E1 network ports. |
| To change the present mode, use the UP and DOWN ARROW keys to |
| highlight the Active/Restore Mode option for the desired port, and use the |
| Space Bar to toggle between the following selections until the desired choice |
| appears: use w/auto restore (failed line is restored automatically when |
| problem is solved); use w/manual restore (user must manually restore line); |
| Never Use (never mux data onto this line); Install/Test only (always mux |
| data onto this line, even when it’s bad). (Default - Never Use) |
|
|
CRC4 | Allows CRC4 coding to be enabled or disabled |
|
|
DL3800E Inverse Multiplexer User’s Guide — July 9, 2001 |