Quick Eagle Networks DL3800E manual DTE Configuration

4

	Table 4-5 Node Configuration Options
Option	Action
Terminal Multidrop Mode	If the terminal is connected to more than one DL3800E, it must be in
	Multidrop Mode. If it is connected to only one unit, this feature can be
	disabled. When it is disabled, the system starts up directly, without you
	having to log in. To change this configuration, move the highlight bar to
	Terminal Multidrop Mode, and use the Space Bar to toggle between the
	options Enabled, and Disabled. (Default - Enabled)

To update the node database with all the changes made, move the highlight bar to CONFIRM and press Enter. Changes can be confirmed after each change, or, after all changes have been made. This completes the node configuration. To abort the changes, move the highlight bar to EXIT and press Enter before confirming the changes. (Note: If the terminal speed, parity or stop bits are changed, it is necessary to change the terminal before continuing.)

DTE Configuration

This menu allows you to configure certain parameters of the DTE, including the interface type, clock source, status of leads, and loss criteria.

To access the DTE CONFIGURATION MENU, move the highlight bar to DTE CONFIGURATION in the CONFIGURATION MENU, and press Enter.

Figure 4-9, 4-10, 4-11, and 4-12 are examples of the DTE Configuration Interface Menus (V.35, RS-449, X.21, and HSSI), and Table 4-6describes the menu items.

4-20 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001