Quick Eagle Networks DL3800E manual Inverse Multiplexer Main Menu Commands, Select LOCAL/REMOTE

4

INVERSE MULTIPLEXER MAIN MENU COMMANDS

When a DL3800E unit is first powered up, the Main Menu (Figure 4-1 on page 4-3) appears on the terminal screen. This describes those functions that can be performed, parameters viewed, changed and/or deleted from this menu. The INVERSE MULTIPLEXER MAIN MENU items are shown in Table 4-1(these items are described in more detail in the following sections)..

	Table 4-1 Main Menu
Menu	Description
Select Local/Remote	Allows you to move between the Main Menu of the Local and Remote
	units.
Alarms and Status	Provides current alarm and status report of the common equipment, DTE,
	and E1 lines.
Statistics	Allows you to access the STATISTICS MENUS of the various E1 lines.
Event History	Allows user to view and clear alarms and event history of the DL3800E.
Configuration	Allows you access submenus to configure certain parameters of the
	DL3800E, network, and DTE.
System Utilities	Allows you to perform various system utility functions such as download
	software, configure SNMP, configure login, and delete or save
	configuration.
Tests	Allows you to initiate diagnostic loopbacks.
Manual Network Restoration	Allows you to manually restore a E1 circuit instead of it being restored
	automatically upon the clearing of a problem.
Logout	Allows you to log out of the DL3800E unit without having to wait for
	automatic logout.

SELECT LOCAL/REMOTE

When in the INVERSE MULTIPLEXER MAIN MENU, this option allows you to view and access the other items on either the local or remote DL3800E. The Device Address and Name in the header portion of the display screen will identify the unit that the terminal is presently communicating with.

To move to the Main Menu of the other DL3800E, highlight SELECT LOCAL/REMOTE and press Enter. The Device Address and Name in the header should change to the new unit as shown in Figure 4-1 on page 4-3.

4-4 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001