Quick Eagle Networks DL3800E manual Configuration Menu

4

Configuration

The CONFIGURATION MENU item provides access to a series of submenus to configure various parameters of the unit, DTE, and network.

Highlight Configuration in the INVERSE MULTIPLEXER MAIN MENU and press Enter to access the CONFIGURATION MENU. See Figure 4-7.

Major	01/01/90 04:58:17		Unit:	0	NET	: 2	(114)
Network 15 Minute UAS			Major Threshold Exceeded
Major	01/01/90 04:58:17		Unit:	0	NET	: 1	(114)
Network 15 Minute UAS			Major Threshold Exceeded
DIGITAL LINK DL3800E		SR	2.00.00 NODE 7:			01/01/90 05:55:07 MJ
SELECTED DEVICE ADDRESS:			7.00.000		NAME:
CONFIGURATION MENU			Exit
Unit

DTE

Network

Network Thresholds

SAVE configuration

Figure 4-7 CONFIGURATION MENU

To access any of the configuration submenus, highlight the desired item and press the Enter key. The following are samples and descriptions of the submenus that can be accessed from the CONFIGURATION MENU.

Unit Configuration

Highlighting UNIT and pressing the Enter key accesses the UNIT CONFIGURATION MENU shown in Figure 4-8. The configurable items and options are described in Table 4-5.

The following parameters can be set or changed for the Node: DATE,

TIME, ALARM ENABLE, AUTOMATIC BACKUP, FRONT PANEL, PERMIT SELECT DEVICE ACCESS FROM REMOTE, UNIT NUMBER, UNIT NAME and LOCAL TERMINAL BAUD RATE, BITS/PARITY, STOP BITS, X-ON/X-OFF and MULTIDROP MODE. HARDWARE, SOFTWARE and MIB REVISIONS are view-only items and cannot be changed.

Terminal Interface 4-17