Quick Eagle Networks DL3800E manual Option Action, Unit Configuration

4

DIGITAL LINK DL3800E		SR 3.00.22 NODE		1:	08/27/00 00:54:47 MAJOR
SELECTED DEVICE ADDRESS:			1.00.000	NAME:
UNIT CONFIGURATION		Exit Confirm
DATE: 08/27/00
TIME: 00:54:38
ALARM ENABLE: Disabled
AUTOMATIC BACKUP: 5 minutes after a database change.
FRONT PANEL: On
PERMIT SELECT DEVICE ACCESS FROM REMOTE:					No
UNIT NUMBER:	1
UNIT NAME:
SOFT SERIAL #: 1389031127991
HARDWARE REVISION: H			SOFTWARE REVISION:		3.00.22	(DOWNLOADED)
MIB REVISION: 1.10 January 10 2000
TERMINAL BAUD RATE:			9600
TERMINAL #BITS AND PARITY: 8 bits, No parity
TERMINAL STOP BITS:			2 bits

Figure 4-8 UNIT CONFIGURATION MENU

		Table 4-5 Node Configuration Options
Option	Action
Date	Move the highlight bar to Date, and enter a valid date with the format
	MM/DD/YY, and press the Enter key.
	MM	1-12 month
	DD	1-31 date
	YY:	0-99 year
Time	Move the highlight bar to Time, and enter a valid time with the format
	hh:mm:ss, and press the Enter key.
	HH	0-23 hours
	MM 0-59 minutes
	SS	0-59 seconds
Alarm Enable	This option allows you to ENABLE or DISABLE the DL3800E unit External
	Alarms. Highlight ALARM ENABLE and, using the space bar, toggle
	between ENABLED and DISABLED until the desired choice appears.
Automatic Backup	This feature allows you to backup the database to the EEPROM
	automatically, at certain intervals, or manually. To change the present
	backup mode, highlight Automatic Backup, and use the Space Bar to toggle
	between the following choices: after every database change, 15 seconds,
	30 seconds, 1 minute, five minutes after each change, or Off (must change
	manually with Save Configuration).

4-18 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001