Quick Eagle Networks DL3800E manual Select Remote

5

DL3800 Inverse Mux

EXIT

SELECT REMOTE

EXIT

DISPLAY

EXIT

TEST

EXIT

CONFIGURATION

ENTER

EXIT

ENTER

EXIT

ENTER

EXIT

ENTER

EXIT

Select Remote/Local

Display Menu

Test Menu

Configuration Menu

This menu loop may also be entered at any time by pressing the Exit button to go up the menu hierarchy until reaching the TOP MENU. Continuing to press Exit while in the TOP MENU brings the unit to the default display DL3800E INVERSE MULTIPLEXER scrolling across the screen. Pressing the UP and DOWN ARROW buttons get you into the menu loop. A menu is selected by pressing Enter when the menu name appears on the display.

The DISPLAY MENU is used for displaying Node Status, DTE Status, and Status of each installed E1 network. The 24-hour line data is only available with the terminal interface or through the Network Manager. The data in the DISPLAY MENU is a subset of the parameters that are available on the ALARM AND STATUS MENU through the terminal interface, or the Network Manager.

The TEST MENU is used for DTE and Network loopbacks. The DL3800E unit does not allow performing tests on the remote unit through the front panel user interface. This feature is only available with the terminal interface.

5-6 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001