4
| Table |
|
|
Parameter | Description/Action |
|
|
DSR (Data Set Ready) | This allows you to Assert, DeAssert, or set to automatic the DSR leads. |
| To change or set the DSR lead status, use the UP and DOWN ARROW |
| keys to highlight RLSD, and use the Space Bar to toggle between Assert, |
| DeAssert, or Automatic until the desired choice appears. Highlight |
| Confirm, and press the Enter key to confirm the change. (In Automatic |
| mode, the 3800E places the signal high when the DTE is sending the |
| associated signal lead DTR.) (Default - Automatic) |
|
|
CTS (Clear To Send) | This allows you to Assert, DeAssert, or set to Automatic the CTS leads. |
| To change or set the CTS lead status, use the UP and DOWN ARROW |
| keys to highlight CTS, and use the Space Bar to toggle between Assert, |
| DeAssert, or Automatic until the desired choice appears. Highlight |
| Confirm, and press the Enter key to confirm the change. (In Automatic |
| mode, the 3800E places the signal high when the DTE is sending the |
| associated signal lead RTS.) |
|
|
TM (Test Mode) | This allows you to Assert, DeAssert, or set to Automatic the TM leads. |
| To change or set the TM lead status, use the UP and DOWN ARROW keys |
| to highlight TM, and use the Space Bar to toggle between Assert, |
| DeAssert, or Automatic until the desired choice appears. Highlight |
| Confirm, and press Enter to confirm the change. (In Automatic mode, the |
| 3800E places the signal high when the DCE’s signal leads for enabling |
| tests are placed high by the DTE.) (Default - Automatic) |
|
|
DTE Loss Detection | Sets the criteria by which a DTE Loss Of Signal will be detected. |
| In X.21 mode RTS refers to the X.21 signal called Control. |
| To change or set the DTE LOS criteria, use the UP and DOWN ARROW |
| keys to highlight DTE LOSS DETECTION, and use the Space Bar to toggle |
| between the choices: RTS, DTR, and None. When the desired choice is |
| shown, highlight Confirm, and press Enter to confirm the change.(In |
| x.21 mode, RTS refers to the x.21 signal called Control). (Default - RTS) |
| The following entries must be added: |
|
|
DL3800E Inverse Multiplexer User’s Guide — July 9, 2001 |