Quick Eagle Networks DL3800E manual Installation

3

Installation

INSTALLATION

NOTE: Before beginning the installation process, inspect the DL3800E unit for damage which may have occurred during shipment. If damage has occurred, notify Quick Eagle Networks and your package carrier immediately.

1.Unpack and inspect the DL3800E unit for damage that might have occurred during shipment. If necessary, wipe off the exterior with a soft cloth. Save all packing slips and papers that come with the unit. Save the shipping cartons and packing materials until installation is complete and proper operation is verified.

2.Verify that all items ordered are included in the shipment. The shipment should consist of the following:

•DL3800E Digital Inverse Multiplexer

•DL3800E User’s Guide (this manual).

•Appropriate data and network interface cables and connectors (if ordered).

•Power cord

3.Mount the DL3800E unit. See “Mounting” on page 3-2.

4.Connect Power Cables and Connections.

See “Power Cables And Connections” on page 3-3

5.Connect network cables to the DL3800E unit. See “E1 Network Connection” on page 3-5

6.Connect the DTE cable to the DL3800E unit. See “DTE Cable And Connection” on page 3-5

7.ASCII Terminal and SNMP Connection

See “ASCII Terminal and SNMP Connection” on page 3-6

3-1