Ricoh 2400L manual 122

AUTOMATICALLY PRINTED REPORTS REPORTS

The following pages explain the symbols that appear in certain columns of the reports.

The Mode Column

See the bottom of the TCR for a full listening of the symbols that are used on the TCR.

The Result Column

OK: Successful Communication

E: An error occurred

The Footnote on the TCR

TX counter: Total number of transmitted pages

RX counter: Total number of received pages

Counters listed on the User Parameter List

SCN: Total number of pages scanned

PRN: Total number of pages printed

Transmission Result Report (Memory Transmission)

In the Result column, some reports may have an "E" followed by a code, and there may be a message printed at the bottom of the report. This code and message indicate that a problem occurred. The codes are explained below.

RESULT	MESSAGE	EXPLANATION
	HANG UP OR LINE FAIL	The other party either a) hung up, b) had no
		message on polling standby, c) cannot do
E-1		confidential reception or transfer request, or d)
		had an ID Code that did not match the one in
		your machine. Alternatively, there could have
		been a problem with the telephone line.
E-2	BUSY	The machine at the other end was busy.
E-3	NO ANSWER	The line is dead (no dial tone was detected).
E-4	NO FACSIMILE CONNECTION	The machine at the other is not a facsimile.

122