Ricoh 2400L manual Operation Routine

3. Repeat step 2 for each adjustment that ap- pears on the screen.

4. Finish: Function.

2. Either:

❒ To increase: k.

❒ To decrease: j.

❒ To accept: Yes.

1. Function 6 2 2 2 2 9 2 and Yes.

The volumes you can adjust are:

Transmitting monitor (TRANS MONITOR): The sound you hear in transmission.

Receiving monitor (RECV MONITOR): The sound you hear in reception.

Dialing monitor (DIAL MONITOR): The sound you TRANSMONITORY/hear after pressing the Startjk key.

Buzzer tone(BUZZER): The volume of the buzzer whenMINyoukkopen a cover and so on.

Key tone (KEY): The sound you hear when you press a eykkon the operationMAX panel.

If the speaker volume is not satisfactory, you can adjust it.

MAX

6. Replace the handset.

Do not replace the handset if you wish to speak to the other party again. When your machine emits a tone, press Stop then speak.

Speaker and Buzzer Volume Adjustments

Your machine has a built in speaker. With this speaker, you can listen to the telephone line without picking up the handset. The speaker will be automatically switched off just before the start of facsimile data communication.

When you are sending a fax message, you will be able to hear the line after the machine has dialed. If the line is busy, you can press the Stop key and start another operation without having to wait for the machine to disconnect the line.

ROUTINE OPERATION

TELEPHONE CALLS

OPERATION

ROUTINE

43