Ricoh 2400L manual Trnsmit

SENDING A FAX MESSAGE ROUTINE OPERATION

Sending to More Than One Location (Broadcasting)

1.	Make sure that the machine is in standby mode (see page 18).
2.	Make sure that the Memory indicator is lit. If it is not, press Memory.
3.	Place your fax message face down into	TRNSMIT	OPTIONk
	the feeder.
	❐ You can dial without placing the message in the	DIALFAXNUMBER
	feeder first. Place the document after you dial
	the number and go to step 5.
	Selecting Contrast and Resolution:
	See page 23.
	Options for Sending a Message:
	See page 28.

4. Dial in one of the following ways.

12225553333TRANSMITY/STARTttttttttt

a) Ten Keypad	b) Quick Dial	c) Speed Dial	d) Group Dial ✬
			Example: Group 1 stored in
			Quick Dial key 08
			Quick Dial key 08

✬: Method: Press the Quick Dial key the Group is stored in (in the example, press key 08).

If your machine is behind a PBX, dial the access code, then a pause, then the telephone number. For an international number, place a pause after the country code. To input a pause, press the Pause key.

20