Ricoh 2400L manual TRNSMITDIAFAXNUMBEROPTIONk

106

3. Press kuntil the screen is as shown opposite.

2. Function 1 4 and Yes.

1. Place your document in the feeder.

This procedure will override the ID Code stored in yourOPmachine.T The overrideY/k is only effective for this one transmission.

DITRNSMITAFAXNUMBEROPTIONk

PUSHSARTOLLINGTRANS k

SETPOLLIGID?ION

Stored ID Override

OTHER ADVANCED FEATURES

3.Start.

❐Your fax message is stored and held on polling standby.

NOTE: If you see "ALREADYINPUT", you already have a message on Free Polling Standby.

❐To clear the old message: Clear the old polling transmission file using function 23 (see page 111). hen start from the step 1 again.

Secured Polling

1. Place your document in the feeder.

TRNSMITDIAFAXNUMBEROPTIONk

2.Function 1 4 and Yes.

POLUSHSTARTLINGTRANS k

NOTE:

If you have not yet stored an ID Code using Function 61, you will be asked to enter an ID Code. Proceed in the same way as for step 4 in "Stored ID Override" on the next page.

3.Start.

❐Your fax message is stored and held on polling standby.

NOTE: If you see "ALREADYINPUT" you already have a message on Se- cured Polling Standby.

❐To erase the old message: Clear the old polling transmission file using function 23 (see page 111).

❐To keep the old message: Input an ID code in the same way as for step 3 in "Stored ID Override" below.