Ricoh 2400L manual Appendix

APPENDIX INSTALLATION AND INITIAL SETTINGS

LOCATION

For the best possible performance, install your machine in a place which satisfies the following conditions.

❐Not exposed to direct sunlight

❐Well ventilated (air turnover at least three times per hour); to avoid the build-up

of ozone, make sure to locate the machine in a large well-ventilated room which has an air turnover of more than 30 yd3/hr per person.

❐Level

❐Not subject to vibration

❐Away from other electronic equipment, to avoid interference

❐Away from areas containing corrosive gas

❐Dust-free

❐Condensation-free

❐Temperature 63 to 82°F

❐Humidity 40 to 70% RH (do not install near a humidifier)

❐Away from heaters and air conditioners, to avoid sudden changes of temperature

❐ Within 5 yards of a three-pin grounded	4"
power outlet (115 Volts, 60 Hz)
❐ With the clearance as shown on the right

4"4"

28"

APPENDIX

NOTE: This machine generates a certain amount of ozone. Although the amount generated is within safety requirements, it is recommended that, to avoid ozone buildup, you install the machine in a room which is properly ventilated.

175