Ricoh 2400L manual 207

APPENDIX SOME ITEMS MUST BE PROGRAMMED FIRST

❐To enter the RTI from the standby

mode, press Function 6 2 2 2 2 6 1 and Yes. And then press ￿ until the screen is as shown opposite. Then press Yes.

❐If you have just enter the RTI in the previous procedure, press Yes.

2.Either:

❐If no TTI has been stored, input the TTI using the Quick Dial keys and the ten key pad.

❐If a TTI has already been stored, and/or you do not wish to edit: No and go to step 4.

❐To change or enter the TTI, press Yes, then edit your TTI Example: XYZ HEAD OFFICE Note: You may use up to 32 charac- ters.

For how to program characters, see page 182.

To edit the TTI "￿￿￿￿￿￿￿￿￿￿￿￿￿", for example, move the cursor below H using￿￿￿and ￿. Press Clear four times and input NY.

3.Press Yes to enter the TTI.

4.You may wish to enter the CSI next. Either;

❐Go to step 1 in the following procedure of CSI programming.

❐Press Function to return to the standby mode.

CSI (Called Subscriber Identification)

￿￿￿￿￿!￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿"￿￿￿￿￿￿" ￿￿￿￿￿￿￿￿

!￿￿￿￿￿￿￿￿￿￿￿

￿￿￿!￿￿￿￿￿￿￿￿￿￿￿￿￿

I

NITIAL SETTINGS

Your CSI appears on the other party’s operation panel during communication instead of your RTI, if the other party’s machine is another manufacturer’s product. The CSI can have up to 20 characters (only numbers and spaces can be used). Enter your fax machine’s telephone number, because some features of your machine may not work if the CSI is not the same as the telephone number.

207