Ricoh 2400L manual Press until the screen is as shown Opposite Press Yes

SOME ITEMS MUST BE PROGRAMMED FIRSTAPPENDIX

RTI (Remote Terminal Identification)

Your RTI appears on the other party’s operation panel during communication, if the other machine was made by the same manufacturer as yours. The RTI can have up to 20 characters (numbers and letters can be used, along with some punctuation marks). Program something easy to recognize, such as your name, company name, or department name within the company.

1.	Press Function 6 2 2 2 2 6 1 and Yes.	￿￿￿￿￿
2.	Press ￿ until the screen is as shown
		￿￿￿!￿￿￿￿￿￿￿
	opposite.
		￿￿￿	￿￿￿￿￿￿

3.Press Yes.

4.Input the RTI using the Quick Dial key or the ten key pad. (You can delete the character using Clear.)

Example: XYZ COMPANY

How to program characters, see page 182.

Note: RTI cannot be not more than 20 characters.

5.Press Yes to program the RTI. You may then enter the TTI. Go to the step 1 in the following procedure in order to enter the TTI.

TTI (Transmit Terminal Identification)

Your TTI is printed at the other end on the top edge of each page that you send. The TTI can have up to 32 characters (numbers and letters can be used, along with some punctuation marks). Program something easy to recognize, such as your name, company name, or department name within the company.

1. Either:

￿￿￿￿￿￿ ￿￿￿￿￿￿￿

206