Ricoh 2400L manual SWITCH0000000000

SENDING A FAX MESSAGE		ROUTINE OPERATION
	SWITCH00:00000000
3. The settings for switch 00 are now shown
on the bottom line of the display.	Digit	7 6 5 4 3 2 1 0

The digits are numbered from 7 to 0; the setting of digit 7 is shown at the left side of the display and digit 0 is at the right.

The settings that you may need to change are those for digits 0, 1, 2, 4, 5, 6, and 7. The functions of these are as follows.

Digit			Purpose
0	Stamp			0: Off		1: On
	Contrast home position
1	Digit 2	Digit 1	Setting
	0	0	Normal*
2
	0	1	Lighten
	1	0	Darken
3	Do not change this setting.
	Resolution home position
4	Digit 5	Digit 4	Setting	Digit 5	Digit 4	Setting
	0	0	Standard*	1	0	Fine
5
	0	1	Detail	1	1	Do not change these
						settings.
6	Tramsmission mode home position
	0: Memory Transmission*		1: Immediate Transmission
7	Halftone on/off home position			0: Off*		1: On

3.If you wish to change one of the settings, press the key on the ten keypad that corresponds to the digit that you wish to change.

Example: 2 on the ten keypad. The value of digit 3 changes.

4.Finish: Yes and Function.

26