Ricoh 2400L manual 161, Switch 09 Various, Switch 10 Various, Switch 11 Various, Switch 12 Various

TECHNICAL REFERENCE ON/OFF SWITCHES AND USER PARAMETERS

Switch 09 - Various

Digit			Purpose
	Memory lock	Digit 1 Digit 0 Setting
	(Feature Expander Required)	X	0	Off*
	Locked messages are printed	0	1	Only Lock messages from senders
0, 1	when you enter the memory			whose RTI/CSI’s are programmed.
	lock ID.	1	1	Lock all messages except those from
				senders whose RTI/CSI’s are
				programmed.
2 to 7	Do not change these settings.

Switch 10 Various

Digit		Purpose
0	Reverse order printing (Feature Expander Required) 0: Off* 1: On
1 to 6	Do not change these settings.
7	Halftone mode	0: Standard Mode*
		1: Speed Mode

Switch 11 Various

Digit		Purpose
0 to 5	Do not change these settings.
6	Printing the received message when acting as a forwarding station.
		0: Off	1: On*
7	Polling standby duration	0: Once*	1: Keep

Switch 12 Various

Digit					Purpose
0 and 1	Do not change these settings.
	Toner saving mode					0: Off*	1: On
	Note:
	If on, contrast will be set to "Normal" automatically, preserving image quality.
	This is available when receiving fax messages and printing						reports, but not for
	copying or printing from a PC.
2	Further, messages sent to you in halftone mode will automatically turn off toner
	saving to ensure a clear image.
	To make sure that the fax quality is acceptable with toner saving on, print a few
	reports (see page 117 ).
	(Note: If the sender is using a machine made by another manufacturer, toner saving
	will stay on and this could lower image quality.)
	Density of the printing image
	Digit 4	Digit 3	Setting	Digit 4	Digit 3	Setting
3 and 4	0	0	Normal *	0	1	Lighten
	1	0	Darken	1	1	Do not use
						this setting.
5 to 7	Do not change these settings.

TECHNICAL REFERENCE

Switch 13 - Do not use.

161