Ricoh 2400L manual ###∗

OTHER ADVANCED FEATURES

6.Press ￿ to move the cursor under the time.

7.Input the time 0 9 0 0 from the ten key pad.

To change AM to PM and the other way around, press # . And press Yes.

8.Repeat from the step 5 for the second timer. Press ￿ to move the cursor under the time.

And input the time 0 6 0 0, for example, from the ten key pad for the timer value

.

To change AM to PM and the other way around, press # . And press Yes.

￿￿￿∗

￿￿￿￿￿'￿￿￿￿￿#(￿##￿￿∗￿'￿￿

￿￿￿￿ ∗￿'￿￿

￿￿￿'￿￿￿￿##￿￿

￿￿￿￿￿￿#￿￿##￿￿∗￿'￿￿

KEEPING THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.

KEEPING THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.

9.Either:

❐Program the timer for another day: Go back to step 3.

❐Finish: Yes and Function.

Note: To print the received messages while the heater is off, press any key. Af- ter all the messages have been printed, the heater will stay on for 5 min- utes before switching off again. Because of this, the Night timer does not give you complete security for received documents. For this type of secu- rity, use the Memory Lock feature; see page 84.

Temporarily Switching the Heating Roller On

During the Night Timer cycle that the heating roller is off, it may be switched back on:

❐When you hold the Energy Saver key for a few seconds.

❐When you insert a document in the feeder.

❐When you pick up the handset, or press On Hook Dial key.

After you leave the machine alone for a while, the heating elements will turn back off. Note that if the automatic saver mode is disabled by a service technician, the night timer will not turn back on.

130