Ricoh 2400L manual Rti/Csi Abcy/N

ADVANCED FEATURES RECEPTION

If the RTI/CSI of the machine sending you a fax is not the same as any of those that you have programmed into this feature, the message will not be forwarded.

Cross-references
RTI and CSI: see page 189.	Wild Cards: see page 91.
TCR: see page 123.

Programming the Forwarding Feature

This section shows you how to set up your machine o forward incoming fax
messages to another location or locations.		SETTING?		jk
1.	Function 6 2 2 2 2 8 2 and Yes.	2125551234tttttttttt
	Example: 2 1 2 5 5 5 1 2 3 4
	To print a list, press k.	PRINTLISTjKPAD/Y/N/SEARCHk
2.	Yes.	tttttttttttttttttttt		jk
3.	Store a forwarding station number.	FORWARD
	If your machine is behind a PBX, add
		FORWARD		Y/N
	the access code before the number, un-
	less this forwarding station is an exten-
	sion connected to the same PBX as
	your machine. Press Yes.
4.	Either:
	❐ If you wish all incoming messages	SETRTI/CSI?
	to be forwarded to this station: No.
	Do not store any RTIs/CSIs for it.
5.	Type in an RTI or CSI.	RTI/CSI	ABCY/N
	❐ If you only wish messages from	RTI/CSI	ABCY/N
	certain senders to be forwarded to	XYZCOMPANYtttttttttt
		tttttttttttttttttttt
	this station:
	Input their RTI’s or CSI’s (mes-
	sages from senders other than
	these will not be forwarded to this
	station): Yes and go to step 5.
	For how to enter characters, see page 166.
6.	Yes.
		FORWARDOREI/CSISETASWILDCARD?Y/N
7.	Either:			Y/N
		RTI/CSI?
	❒ Store this RTI as a wild card: Yes.

❒ Otherwise: No.

ADVANCED FEATURES

83